Mitel 3300 Technician's Handbook page 171

MXe CARRIER BOARD
RETAINING SCREW
STRATUM 3 CLOCK
MODULE
MXe CARRIER BOARD
Figure 28: MXe III Controller with Top Cover Removed
Figure 29, below, shows the MXe II PATA RAID controller and pre-formed
IDE cable. Use the cable to connect the RAID controller to the carrier
board.
(SUPPLIED WITH 2-PACK HARD DRIVE KIT)
Figure 29: MXe II PATA RAID Controller and Pre-formed IDE Cable
Install and Replace Units
ANALOG MAIN
BOARD (AMB)
POWER CABLES
161