To Use An Alternative Dhcp Server (Prior To Rel 7.0) - Mitel 3300 Technician's Handbook

3300 ICP Technician's Handbook
- 133 Priority, integer value of 1-6 (Optional. Required if a voice
VLAN is in use. For external server use Hex LONG; for internal
server use decimal value of 1-6)
- 134 Diffserv Code Point, integer value
If there are 5230 IP Appliances, create the following options:
- 6 DNS Server, IP address format
- 44 NetBIOS Name Server, IP address format
6. In the DHCP Options form, for a cluster environment, program IP
Console (if any) with a static IP Address. Then, do the following:
Program Options 128 and 129 with:
- Format: IP Address
- Value: IP Address of the controller that controls the device
- Scope: Static: <device name><subnet>.
If different VLAN tagging and priority information is needed for the IP
Console, repeat step 6 for Options 132 and 133.
If a different router is need for any IP Consoles, repeat step 6 for
Option 3 and set the Value to the IP address of the router.
7. In the DHCP Lease Viewer form, ensure that there is no DHCP IP
Address Lease for the IP Console MAC Addresses. If there is, delete
it and then power off and power on the device.
8. In the DHCP Server form, enable the internal DHCP server.

To use an alternative DHCP server (prior to Rel 7.0)

See page 283 and page 283:
1. In the DHCP Server form, disable the internal DHCP server.
2. Program your DHCP server with the following options:
- 128 TFTP IP address format
- 129 RTC IP address format
- 130 MITEL IP PHONE, string value.
396