Mitel 3300 Technician's Handbook page 82

3300 ICP Technician's Handbook
Note: The System Administration Tool will temporarily lock you out for 15
minutes after three consecutive attempts to log in have failed.
Mitel Integrated Configuration Wizard
Install the Configuration Wizard on a maintenance PC that meets the
following requirements:
• Windows 2000 or Windows XP Professional operating system
• JRE (Java Run-time Environment) 1.6.0_1 or later installed
To install the Configuration Wizard onto the maintenance PC:
• Close all applications running on the PC.
• Download the MICW Setup.exe file from MOL.
• Double-click the Setup.exe file. Follow the prompts to install the
program.
ISDN Maintenance and Administration Tool
You can install IMAT on the Maintenance PC or on its own PC (IMAT PC).
Tip: We recommend using an Ethernet connection from the IMAT PC when
running Windows NT 4.0, Windows 2000 Professional, Windows XP, or
Windows 98. For Windows 95/98 (without a NIC), use Dial-up Networking.
To install IMAT on the PC:
1. Close all the applications running on the PC.
2. Obtain the IMAT software from MOL or insert the 3300 ICP/MCD
software CD-ROM in the CD drive (applies to MCD 4.x and earlier).
3. For CD-ROM-based software only, open the Tools folder, then the
Disk 1 folder.
4. Double click the Setup.exe file. The installation program starts. Follow
the prompts to install IMAT.
5. Connect the NSU Ethernet port directly to the NIC of the PC using a
crossover cable or connect the NSU Ethernet port to the network.
Tip: Refer to the IMAT online help for LAN connection details. If you're using
a dial-up connection, see "Installing System Software on the FTP Server" on
page 106.
72