View Logs; View Maintenance Or Software Logs; Collect System Logs - Mitel 3300 Technician's Handbook

5. Click Next to navigate through the Certificate Import Wizard windows.
6. Click Finish on the Completing the Certificate Import Wizard window.
7. Click Yes on the Root Certificate Store window.
8. Click OK until you can view the web page.

View Logs

View Maintenance or Software Logs

View maintenance and software logs from the System Administration Tool.
Reset
Interpretation
Cause
0x3 Hard reset
0x13 Checkstop reset
(see PPC82XX
manual)
0x43 Watchdog reset
0x83 Power-on reset
0x103 Programmed reset
0x203 Push-button reset

Collect System Logs

Product Support may request logs in the event of a system failure (see
Table 14 below). In the event of a system lockup, go to "Collecting System
Lockup Logs Manually" on page 406.
Linux Software Logs on the MXe Server APC-MXe
The Linux software stores logs in the /var/logs directory. You can view
these logs via the MSL web interface. You need root privileges to view
these logs.
Table 13: System Reset Causes
Root Cause
Unknown reset.
Double bus fault as documented in the
Power PC Manual(s).
The watchdog task was unable to write to
the hardware watchdog. A higher priority
task is running or interrupts are disabled.
This is a software problem.
The system lost AC power.
The system software intentionally
restarted the system.
The front panel reset button was pressed.
Maintenance
119