Peripheral Cabinet; Digital Service Unit (Dsu) - Mitel 3300 Technician's Handbook

wvSpy 20, "system.wvr", 3
i
HardResetHookAddTaskName "DRATask
. . .
. . .
HardResetHookGroupTaskTrace
2. FTP sysinfo.txt file into the db directory of the 3300 ICP:
At the DOS prompt, type cd c:\sysinfo.txt
Type ftp <ip address of the controller>
Login with the ESM username and password.
Type binary
Type cd /db
Type put sysinfo.txt (OR enter each command at the RTC console)
Type bye
3. Execute the sysinfo.txt on the RTC Console if the 3300 ICP locks up:
Access RTC Console via communication software (i.e. HyperTerm).
Type cd "/db"
Type <sysinfo
4. Collect all required logs. See "To collect the logs through PC to
controller network connectivity:" on page 406.

Peripheral Cabinet

Tip: Refer to the Release 7.0 version of the Technician's Handbook for
SX-2000 peripheral cabinet information.

Digital Service Unit (DSU)

Tip: Refer to the Release 7.0 version of the Technician's Handbook for Digital
Service Unit information.
Older Hardware and Software
407