Upgrade To Mcd 5.0 And Group Licensing - Mitel 3300 Technician's Handbook

- Click Next to accept the location displayed and continue.
You will see a read-only list of the configurations you have made.
Tip: If you do not see this list, your FTP server is not installed properly.
Re-install your FTP server.
5. Click Next.
Tip: If the install files get installed on the PC's c: drive, it means that your
FTP server is not installed and you will get a message "No FTP Server".
Re-install your FTP server.
Time: The system takes approximately 10 minutes to copy the files.
6. Ensure that the Read manual instructions to complete the
installation check box is selected, and click Finish. The README file
opens.
Note: Every time you install system software on the FTP server, a new
file is added to the administrator's PC. To avoid filling up your hard drive,
select My Computer > Add or Remove Programs and delete older files.

Upgrade to MCD 5.0 and Group Licensing

Upgrading to MCD 5.0 and enabling license sharing (Group Licensing)
should be undertaken as follows to avoid license rejection errors in the
Software Installer.
1. Upgrade all switches to MCD 5.0 using the existing licensing.
2. Ensure that the switches to be added are added to an Application
Group in the same SDS sharing community.
3. On the AMC:
- For each member, ensure that SWA is activated with dates that
agree with the other members. Align the dates if necessary.
- For the Designated License Manager (DLM), create an ARID and
transform it into a GARID by applying the Enterprise License Group
part number.
- Add the ARIDs to the GARID. All the licenses previously attached
to the individual ARIDs, will be migrated to the GARID.
4. From the MCD System Administration Tool:
- For each member, navigate to the License and Option Selection
form, click Change, and then Retrieve Licenses.
Software Installation
107