Apc Hard Drive (Cx/Cxi) - Mitel 3300 Technician's Handbook

3300 ICP Technician's Handbook
8. Slide the bracket back into the chassis, and fasten the screws
connecting the bracket to the back of the controller.
Tip: In the CX, there is no internal connection between the controller and the
APC-CX(i) so you must connect both the 10/100 LAN port and the 10/100
ETX port (on the front panel of the CX) to the LAN.

APC Hard Drive (CX/CXi)

If you are installing the optional Application Processor Card in a CX or CXi
controller, then you must also install a hard drive to support the operating
system and applications of the APC-CX(i). If you are replacing an APC
hard drive with one that does not have the MSL software installed, refer to
"Installing MSL Software on APC (CX/CXi) or APC-CX(i) II (CX II/CXi II)"
on page 105.
192
Figure 58: Tightening the Screws