Migrate Sx-2000 Pbx Hardware - Mitel 3300 Technician's Handbook

3300 ICP Technician's Handbook
11. Select the Scripting tab and enter:
- for a 3300 Universal NSU: c:\program files\mitel\
Imat\pridun.scp.
- for an R2 NSU: c:\program files\mitel\Imat \r2dun.scp.
12. Click OK.

Migrate SX-2000 PBX Hardware

Only the MicroLIGHT can be migrated using this procedure. To migrate an
SX-2000 Light Non-redundant system, simply replace the control cabinet
with a 3300 controller.
To upgrade SX-2000 MicroLIGHT hardware for 3300 ICP control:
1. Remove the Main Controller (MMC) from slot 1/1/1.
2. Install a triple FIM in that slot.
3. Remove any FIM carrier cards in the DSU slots.
4. Do NOT remove any other cards.
Tip: Refer to Knowledge Base Article 04-1000-00068 (TB 58005193) for
Migration procedure details.
An SX-2000 MicroLIGHT system converted to 3300 control uses fiber
interface modules (FIM) of the triple FIM carrier card as required:
• One triple FIM carrier card
• One control resources card
• One peripheral switch control (PSC) Card
• One to eight peripheral interface cards (PIC)
• Optionally, one to four DSU cards 0 DSU1 through DSU4.
Table 117: Triple FIM Carrier Card Ports Support Matrix
Triple FIM Carrier Card Port
Circuit 1 (bottom)
Circuit 2
Circuit 3 (top)
404
When connected, support
PER cards (required)
DSU in slots 2 and 3
DSU in slots 4 and 5