Migrate Sx-2000 Database Across Platforms - Mitel 3300 Technician's Handbook

3300 ICP Technician's Handbook

Migrate SX-2000 Database Across Platforms

To migrate an SX-2000 database to a 3300 Release 7.0 system and up,
you use the 3300 ICP Configuration Tool to back up the SX-2000
database and then use the Software Installer Tool to restore the SX-2000
database file to the 3300 ICP.
SX-2000
software version
LW 34.2 or later
older than
LW 34.2
Note:You can migrate an SX-2000 MicroLight cabinet for use in a 3300 ICP
system. See "Migrate SX-2000 PBX Hardware" on page 404 for details.
Note:You cannot migrate an SX-2000 database to an AX controller.
Prerequisites
• Use the 3300 ICP Configuration Tool or Mitel OPS Manager to
prepare the SX-2000 for migration. See "Migrating the SX-2000
Database" in the 3300 Configuration Tool Help or "Migrate element
databases" in the OPS Manager Help.
• Ensure you have a backup file of the SX-2000 database and know its
location.
To migrate the SX-2000 database:
1. To migrate the SX-2000 database, verify the Database Restore box
is checked, or
To restore the SX-2000 database file, confirm that the Restore from
the SX-2000 database file box is checked.
2. Click Browse.
136
• upgrade SX-2000 to LW 34.2
• use Configuration Tool to make a backup
• use the Software Installer to restore the backup to a
3300 ICP running 7.0 software (or higher version)
• use Configuration Tool to make a backup on the SX-2000
• use Configuration Tool to restore the backup to a
3300 ICP running 6.1 software
• upgrade the 3300 ICP to Release 7.0 or later.
Migration procedure