Mitel 3300 Technician's Handbook page 114

3300 ICP Technician's Handbook
Table 11: Maximum Elements Change or Flexed Dimension
Elements / Dimensions
From
30 or 60 / 30 or 60 /
Flexed Flexed
Dimension Dimension
Selection Selection
30 or 60 / 250 or 999 /
default or default
Flexed
Dimension
Selection
30 or 60 / 250 or 999 /
Flexed Flexed
Dimension Dimension
Selection Selection
250 or 999 / 30 or 60 /
default default
250 or 999 / 30 or 60 /
default Flexed
Dimension
Selection
Tip: The system software ships with small system dimensions enabled. You
enable the large network cluster when you select 250 or 999 Maximum
Elements per Cluster in the License and Option Selection form. The Default
Feature Resources Dimension changes from Dimension 17 to Dimension 19.
104
Selection (continued)
MCD Software
Installer
To
Install or Upgrade
Install
See "To upgrade and
change to a default
dimension:" on
page 108.
Install only. Do not
perform a data
restore with the
Software Installer.
See "To upgrade and
change to a flexed
dimension:" on
page 109.
Install
See "To upgrade and
change to a default
dimension:" on
page 108.
Install only. Do not
perform a data
restore with the
Software Installer.
See "To upgrade and
change to a flexed
dimension:" on
page 109.
Notes
Use Dimension Selections
from the backup file.
Use the existing Dimension
Selections.
If changing from Flexed
Dimensions, it is possible
that data may be lost.
After the Install and
Maximum Element
selection, Flex Dimensions,
Reboot, and Restore
through ESM. Use the
existing Dimension
Selections.
Use the existing Dimension
Selections.
It is likely that data will be
lost when going from a large
database to a smaller one.
Install, select Maximum
Elements, Flex Dimensions,
Reboot, and then Restore
using ESM. Use the existing
Dimension Selections.
Data may be lost when
going from a large database
to a smaller one.
Page 2 of 2