Recover Mxe Server; Before You Begin; Install Replacement Hardware - Mitel 3300 Technician's Handbook

3300 ICP Technician's Handbook

Recover MXe Server

Use this recovery procedure if both hard drives have failed.

Before You Begin

To complete this procedure, you will require
 Backup of 3300 ICP database
 Replacement hard drive(s)
 Laptop
 External USB connected CD/DVD drive
 Communications application (for example, Hyperterminal)
 RS-232 serial cable
 Ethernet cable (straight-through)
 Mitel Communications Director Recovery CD
 MCD Software Installer tool
 Application Record Identification Number (AMC ARID)

Install Replacement Hardware

1. If possible, back up the current database. If you cannot back up the
database, obtain a previous backup and save it to your laptop.
2. Power down the MXe Server.
3. Replace the faulty hardware. See "Replace Both Hard Drives in an
MXe Server" on page 213.
4. Power up the MXe Server and wait 3 minutes. It takes approximately
3 minutes before the software enables the printer port.
146