Mitel 3300 Technician's Handbook page 62

3300 ICP Technician's Handbook
Figure 15: MXe and CX II/CXi II Controller Rack-Mount 4-Piece
MXe (Two-piece Bracket Installation)
1. Attach the mounting brackets to the MXe using the flat head screws
provided.
2. Loosely install one frame mounting screw on each side of the frame:
- in the bottom hole position of the space that the MXe will occupy.
- loosely enough that the frame mounting bracket can be dropped
into position, resting on the screw thread (see Figure 16).
3. Position the MXe on the frame, resting the MXe mounting brackets on
the frame mounting screw thread.
- The MXe will rest on those screws while the remaining screws are
installed.
4. Install two more screws on each side of the frame, in the 3rd and 6th
hole positions.
52
Bracket Installation