Mitel 3300 Technician's Handbook page 135

Table 16: Device Connectivity Form Fields (continued)
Field name
Last Known CDP L2 Port MAC
Last Known CDP Port Identifier
Last Known CDP L2 IP Address IP address of the CDP Layer 2 switch where
State
Move Acknowledged
Tip: Refer to the System Administration Tool online help for Device - Move
examples and explanation of field information.
Description
MAC address of the CDP Layer 2 switch
where the IP device was connected on first
registration or registration after a move.
-
"Unknown" device is one that does not
support CDP with its current firmware
load. A 'Reload' of set firmware may be
required.
-
"Not Supported" device indicates that L2
switches do not support CDP. Contact the
L2 switch provider; an upgrade may be
required.
Port number on the CDP Layer 2 switch
where the IP device was connected on first
registration or registration after a move.
the IP device was connected on first
registration or registration after a move.
"In Service" or "Out of Service". This data
used by the system to determine whether
multiple in-service devices are connected
through the same Layer 2 MAC and Port.
Useful for identifying system configuration
issues.
"Not applicable" indicates a device that has
not moved. This is the only editable field. After
you have updated the Customer Emergency
Services ID (CESID) Assignment form,
change this field to Yes. Click Data Refresh
to remove the device from the list of Moved
devices.
Maintenance
Page 3 of 3
125