Mitel 3300 Technician's Handbook page 287

Table 50: E2T Static IP Address Programming (continued)
Option Name
Hardware Address:
Type
Other - Type
Address
Other - Address Length
Client ID
Note: The E2T MAC address is found on the MAC Address label on the rear
panel of the ICP. Of the three MAC Address labels on the rear panel, use the
one that refers to "E2T MAC", "Slot 1".
Table 51: IP Address Range (Scope) Programming
Option Name
Name of the range
Subnet
IP Range Start (see note) Start of scope
IP Range End (see note)
Protocol
Client's class ID must
match name
Lease Time
Note:Cannot be modified once form is saved.
Value
MAC Address
n/a
MAC address of controller
E2T (see the Note)
n/a
n/a
Value
End of scope
Select "None", "BOOTP",
"DHCP", or "BOOTP or
DHCP"
Clear check box.
2 Weeks
Installation Planner
Notes/Example
00:12:3a:4b:c5:67
Notes/Example
System-generated
192.168.1.15
192.168.1.25
Default is "BOOTP or
DHCP"
Minimum 5 minutes.
277