Acd Group Supervisor - NEC Univerge SV8100 Programming Manual

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
UNIVERGE SV8100
Level:
SA
Description
For each ACD Group (1~64), use
the group supervisor extension and operating mode. Operating modes are:
An ACD Group can have only one supervisor. In addition, an extension can be a
supervisor for only one ACD Group.
Input Data
Item
No.
01
02
Conditions
Feature Cross Reference
Programming Manual
0 = Supervisor extension does not receive ACD Group calls.
1 = Supervisor extension receives ACD Group overflow calls only.
2 = Supervisor extension receives ACD Group calls just like all other agents.
ACD Group No.
Item
Group Supervisor
Extension
Operation Type
If you assign an extension as a ACD Group Supervisor in this program, you
cannot program the same extension as a System Supervisor in
Program 41-01-01.
Automatic Call Distribution (ACD)
Program 41 : ACD Setup

41-04 : ACD Group Supervisor

Program 41-04 : ACD Group Supervisor
Input Data
Extension Number (Up to eight digits)
0 = Do not receive any ACD incoming calls (No)
1 = Receive ACD incoming calls in case of
overflow (Busy)
2 = Receive ACD incoming calls all the time (Yes)
Issue 1.0
to assign
01~64
Default
No
Setting
0
2 - 431