NEC Univerge SV8100 Programming Manual page 54

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
Issue 1.0
Program 10 : System Configuration Setup
Level:
IN
Description
Use Program 10-08 : Pre-Ringing Setup to enable or disable pre-ringing for trunk
calls. This sets how a trunk initially rings a telephone. With pre-ringing, a burst of
ringing occurs as soon as the trunk LED flashes. The call then continues ringing with
the normal ring cadence cycle. Without pre-ringing, the call starts ringing only when
the normal ring cadence cycle occurs. This may cause a ring delay, depending on
when call detection occurs in reference to the ring cycle.
Input Data
Conditions
Feature Cross Reference
2 - 20
Item No. Description
01
Pre-Ringing
Used with Analog Trunks only.
Central Office Calls, Answering
Synchronous Ringing
UNIVERGE SV8100
10-08 : Pre-Ringing Setup
Input Data
0 = No
1 = Yes
Program 10 : System Configuration Setup
Default
0