E&M Tie Line Class Of Service - NEC Univerge SV8100 Programming Manual

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
UNIVERGE SV8100
Level:
IN
Description
Use Program 34-02 : E&M Tie Line Class of Service to assign a Class of Service to
a Tie line (there are 15 Tie line Classes of Service). The Class of Service options are
defined in Program 20-14. For each Tie line, make a separate entry for each Night
Service mode.
Input Data
Conditions
Feature Cross Reference
Programming Manual
34-02 : E&M Tie Line Class of Service
Trunk Port Number
Item Day/Night
No.
01
Program 20-06 cannot be used to assign Class of Service to Tie lines.
Tie Lines
Program 34 : Tie Line Setup
Class Default
Mode
1~8 1~15 1
Issue 1.0
1~200
Related
Program
20-14
2 - 393