NEC Univerge SV8100 Programming Manual page 191

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
UNIVERGE SV8100
Item
No.
11
12
13
15
16
18
19
Programming Manual
Item
Callback Automatic Answer
Use this option to enable or disable
automatic answer of calls recalling
to a station. For example, if a
Transfer Recall or Hold Recall is
ringing back to a station, the
following happens:
If PRG 15-02-11 is enabled, the
station will automatically answer
the recall when it goes off-hook.
If PRG 15-02-11 is disabled, a
station will not automatically
answer the recall when it goes off-
hook. The user must first press the
line appearance of the recalling call
or press the answer key.
Off-Hook Ringing
Use this option to set the telephone
Off-Hook signaling. Off-hook
signaling occurs when a telephone
user receives a second call while
busy on a handset call. To enable/
disable Off-Hook Signaling for an
extension Class of Service, use
Program 20-13-06.
Redial List Mode
Select whether the Redial List
feature should store internal and
external numbers (0), or only
external numbers (1).
Storage of Caller-ID for
answered call
Handsfree Operation
Enable or disable an extension
ability to use the speakerphone on
outside calls. When disabled,
users can hear the conversation,
but cannot respond handsfree.
Power-Saving Mode
CTA Data Communication Mode
Select 0 if the dip switch settings
on the CTA Adapter are set to PC
connection (1=on, 2~8=off) or
select 1 if the DIP switches are set
to printer connection (1~2=on,
3~8=off).
Input Data
0 = Off
1 = On
0 = Muted Off-Hook
Ringing
1 = No Off-Hook Ringing
2 = Not Used
3 = Beep in Speaker (SP)
4 = Beep in Handset (HS)
5 = Speaker & Handset
Beep
0 = ICM/Trunk (Extension/
Trunk Mode)
1 = Trunk Mode
0 = Disable (Off)
1 = Enable (On)
0 = Disable (Off)
1 = Enable (On)
0 = Normal mode
1 = Power-Saving Mode
(Eco-Mode)
0 = CTI Mode
1 = Non Procedural Mode
(Non-SCS)
Issue 1.0
Related
Default
Program
1
5
1
1
1
1 20-02-10
0 15-02-20
2 - 157