NEC Univerge SV8100 Programming Manual page 747

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
UNIVERGE SV8100
Alarm
Type Report
No.
92 2 0 Primary
compulsion
specification.
93 0 NetLink node
2
connection
detection.
94 0 NetLink node
2
secession
detection.
95 2 0 Data Base
replication
fail.
96 0 Data base
1
recovery fail.
97 0 DB recovery
2
operation
start.
98 0 DB recovery
2
operation
finish.
99 --- Reserved ---
100 --- Reserved ---
Conditions
None
Feature Cross Reference
None
Programming Manual
Table 2-20 Description of Alarm (Continued)
Name Content of Alarm
The Primary compulsion
specification function was
executed.
The connection of the node
was detected with Primary
of NetLink.
The secession of the node
was detected with Primary
of NetLink.
Because Secondary is in
programming mode, the
replication of DB cannot be
executed.
Error happened when
DataBase recovery
operation.
Backup/Restore
Start Data base recovery
operation.
Backup/Restore/Delete
Finish DataBase recovery
operation.
Backup/Restore/Delete
Cause Action
• The Primary No action is necessary.
compulsion
specification
function was
executed.
• The connection of No action is necessary.
the node was
detected with
Primary of NetLink.
• The secession of No action is necessary.
the node was
detected with
Primary of NetLink.
• It is possible to be Log out from the
logging it in with programming mode
Secondary in the with Secondary.
Web Pro or the PC
Pro as the cause.
Lack of resource Delete unnecessary file
Memory, protected and keep open area to
area, recovery data restore, then operation
file corruption again.
maybe reason of
this.
Start Data base No action is necessary.
recovery operation.
Finish Data base No action is necessary.
recovery operation.
Issue 1.0
Alarm
Recovery
Status
INF
INF
INF
WAR
WAR
INF
INF
2 - 713