Load Data - NEC Univerge SV8100 Programming Manual

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
UNIVERGE SV8100
Level:
SA
Description
(This program is available only via telephone programming and not through PC
Programming).
Use
Drive to the SRAM and Flash ROM in the system.
Conditions
Feature Cross Reference
None
Programming Manual
Program 90 : Maintenance Program
Program 90-04 : Load Data
Input Data
Item
Item
No.
01 Dial 1+ press Transfer (Press Transfer to cancel.)

Load Data

After uploading the programming, reset the system and wait a few minutes for the
system to reset completely before accessing any line or special system feature.
Otherwise, some unusual LED indications may be experienced.
to load the system data from the inserted USB Flash
Input Data
Issue 1.0
90-04 : Load Data
2 - 699