Vrs Delay Announcement - NEC Univerge SV8100 Programming Manual

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
UNIVERGE SV8100
Level:
SA
Description
Use
be used as the message source for the 1st and 2nd Delay Announcement Messages.
Refer to Program 41-08 for more on setting up the ACD overflow options.
This program is activated when the delay announcement source and options are
assigned as VRS in Program 41-08-03.
Input Data
Item
No.
01
02
03
04
05
06
07
Programming Manual
Program 41-11 : VRS Delay Announcement
ACD Group No.
Delay Message Start Timer
Input the time before the 1st Delay Message Starts.
1st Delay Message Number
Input the VRS Message to be played as the 1st Delay
Message.
1st Delay Message Sending Count
Input the number of times the 1st Delay Message is sent.
If set to 0, the message is not played.
2nd Delay Message Number
Input the VRS Message to be played as the 2nd Delay
Message.
2nd Waiting Message Sending Count
Input the number of times the 2nd Delay Message is
sent. If set to 0, the message is not played.
Tone Kind at Message Interval
Input what is heard between the Delay messages.
ACD Forced Disconnect Time after the 2nd Delay
Message
Set the time, after the last 2nd Delay Message is played,
before the call is disconnected.
Program 41 : ACD Setup

41-11 : VRS Delay Announcement

to assign the VRS message number to
Item
Issue 1.0
01~64
Input Data Default
0~64800 (sec)
0~101
0 = No Message
101 = Fixed Message
0~255
0~101
0 = No Message
101 = Fixed Message
0~255
0 = Ring Back Tone
1 = MOH Tone
2 = BGM Source
0~64800 (sec)
(0 = No Disconnect)
0
0
0
0
0
0
60
2 - 439