NEC Univerge SV8100 Programming Manual page 408

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
Issue 1.0
Input Data
Item
No.
01
02
04
Conditions
None
Feature Cross Reference
2 - 374
When entering names in the procedures below, refer to this chart. Names can
Use this keypad
digit . . .
Enter characters:
£
# # = Accepts an entry (only required if two letters on the same key
are needed - ex: TOM). Pressing
programming mode, use the right arrow soft key instead to accept
and/or add a space.)
Conf Clear the character entry one character at a time.
Hold Clear all the entries from the point of the flashing cursor and to the
right.
Item
All Call Paging Zone Name
Assign a name to each All Call Internal Paging zone.
The name shows on the display of the telephone
making the announcement.
Page Announcement Duration
This timer sets the maximum length of Page
announcements.
(Affects External Paging only)
Privacy Release Time
Once the user initiates a Meet-Me Conference or
Voice Call Conference, the system waits this time for
the Paged party to join the call.
Paging, External
Paging, Internal
Key for Entering Names (Continued)
have up to 12 digits.
When you want to. . .
+ , - . / : ; <
UNIVERGE SV8100
= > ?
# again = Space. (In system
Input Data Default
Up to 12 Group
All
Characters
0~64800 1200
(sec)
0~64800 90
(sec)
Program 31 : Paging Setup
¢
Related
Program
11-12-19
31-02-02