Service Code Setup (For Service Access) - NEC Univerge SV8100 Programming Manual

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
UNIVERGE SV8100
Level:
IN
Description
Use Program 11-12 : Service Code Setup (for Service Access) to customize the
Service Codes which are used for service access. You can customize additional
Service Codes in Programs 11-10, 11-11, and 11-13 through 11-16.
The following chart shows:
Input Data
Item
No.
01
02
03
04
05
06
07
08
09
10
Programming Manual
Program 11 : System Numbering

11-12 : Service Code Setup (for Service Access)

The number of each code (01~59).
The function of the Service Code.
The type of telephones that can use the Service Code.
The default entry. For example, dialing 705 (code 05) cancels a previously set
Camp-On.
Programs that may be affected with the changing the code.
Item
Bypass Call
Activating Call Forwarding/Do Not Disturb Override.
This code is available only if you disable the voice
mail Single Digit dialing code in Program 11-16-09.
Conference
Override (Off-Hook Signaling)
Set Camp-On
Cancel Camp-On
Switching of Voice Call and Signal Call
Step Call
Barge-In
Change to STG (Department Group) All Ring
Station Speed Dialing
Terminals Default
Program
MLT, SLT 707
MLT, SLT # 1
MLT, SLT 709
MLT, SLT 750
MLT, SLT 770
MLT, SLT 712
MLT, SLT 708
MLT, SLT 710
MLT, SLT No
Setting
MLT, SLT # 2
Issue 1.0
Related
11-16-09
16-02
2 - 97