Service Code Setup (For System Administrator) - NEC Univerge SV8100 Programming Manual

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
Issue 1.0

11-10 : Service Code Setup (for System Administrator)

Level:
IN
Description
Use
Service Codes for the System Administrator. You can customize additional Service
Codes in Programs 11-11~11-16. The following chart shows:
Input Data
Item
No.
01
02
03
04
05
06
07
08
09
10
11
2 - 90
Program 11 : System Numbering
Program 11-10 : Service Code Setup (for System Administrator)
The number of each code (01~42).
The function of the Service Code.
The type of telephones that can use the Service Code.
The default entry. For example, dialing (item 26) allows users to force a trunk line to
disconnect.
Item
Night Mode Switching
--- Not Used ---
Setting the System Time
Storing Common Speed Dialing
Numbers
Storing Group Speed Dialing
Numbers
Setting the Automatic Transfer for
Each Trunk Line
Canceling the Automatic Transfer
for Each Trunk Line
Setting the Destination for
Automatic Trunk Transfer
Charging Cost Display by the
Supervisor
--- Not Used ---
Entry Credit for Toll Restriction
Terminals Default
MLT, SLT 718
MLT 728
MLT 753
MLT 754
MLT 733
MLT 734
MLT 735
MLT Not Set
MLT Not Set
Program 11 : System Numbering
UNIVERGE SV8100
to customize the
Related
Program
12-xx
20-07-01
24-04-01
24-04-01
24-04-01