NEC Univerge SV8100 Programming Manual page 301

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
UNIVERGE SV8100
Item
Item
No.
08
Restriction Table
09
Restriction for
Common Speed Dials
10
Restriction for Group
Speed Dials
11
Intercom Call
Restriction
12
PBX Call Restriction
13
Restriction of Tie
Line Calls
14
Trunk Transfer
Restriction on
Incomplete Dial
15
Common Hold
Restriction on
Incomplete Dial
Programming Manual
Input Data Default
1~4 = Table 1, 2, 6~15 = 0
0 = Disable
3 = 1
(None)
4 = 2
5 = 3
0 = Does Not
Restrict
1 = Following
Restriction
Check
0 = Does Not
Restrict
1 = Following
Restriction
Check
0 = Disable
(No)
1 = Enable
(Yes)
0 = Disable 1~6, 8~15 = 0
(No)
7 = 1
1 = Enable
(Yes)
0 = Disable
(No)
1 = Enable
(Yes)
0 = Not allow 0 (Not allow)
1 = Allow
0 = Not allow 0 (Not allow)
1 = Allow
Description
Set the tables 1~4 when referring
to the table set up by 21-06-07.
0 Use this option to enable/disable
Toll Restriction for Common
Speed Dialing numbers. If
enabled, System Speed Dialing
numbers have the same
restrictions as manually dialed
numbers.
0
Use this option to enable/disable
Toll Restriction for Group Speed
Dialing numbers. If enabled,
Group Speed Dialing numbers
have the same restrictions as
manually dialed numbers.
0 Determines if incoming and
outgoing intercom calls are
allowed.
Use this option to set how the
system Toll Restricts calls over
PBX trunks. If you enable PBX
Toll Restriction, the system begins
Toll Restriction after the PBX
access code. The user cannot dial
a PBX extension. If you disable
PBX Toll Restriction, the system
only restricts calls that contain the
PBX access code. The system
does not restrict calls to PBX
extensions. Refer to the PBX
compatibility feature. Make sure
Program 21-05-04 (Maximum
Number of Digits Table
Assignment) allows for PBX Toll
Call Dialing (normally 12 digits).
0 It chooses whether the toll
restriction of the dial set up by
34-08 is enabled or disabled.
If this program is set to 1, you can
transfer the outgoing trunk which
you dialed incompletely.
If this program is set to 1, you can
hold the outgoing trunk which you
dialed in restriction check.
Issue 1.0
Related
Program
21-06-07
34-08
2 - 267