Station Control - NEC Univerge SV8100 Programming Manual

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
Issue 1.0
Level:
SA
Description
(This program is available only via telephone programming and not through PC
Programming).
Use Program 90-07 : Station Control for extension maintenance.
Input Data
Conditions
None
Feature Cross Reference
None
2 - 702
Program 90 : Maintenance Program
Menu Number
Item
Item
No.
01
Extension Control

90-07 : Station Control

1 = Hardware Reset
2 = Software Reset
Input Data
Extension Number (up to eight digits)
Program 90 : Maintenance Program
UNIVERGE SV8100