NEC Univerge SV8100 Programming Manual page 287

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
UNIVERGE SV8100
Conditions
Feature Cross Reference
None
Programming Manual
These timers are used when an extension or trunk is assigned to a class from 1 to
16 in 20-29-01 or 20-30-01. When the timer class is set to 0, the system-wide
timer is used.
All defaults are the same as the system-wide timers.
Issue 1.0
2 - 253