Programmable One-Touch Keys - NEC Univerge SV8100 Programming Manual

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
Issue 1.0
Level:
IN
Description
Use Program 15-14 : Programmable One-Touch Keys to define the One-Touch
key data for each multiline terminal.
For each UNIVERGE SV8100 Wireless telephone to use the Transfer When Out of
Range feature, enter the destination number (up to 24 digits) and name (up to 12
characters) into One-Touch bin 10. Make sure to add any required trunk access
codes for outside numbers. If this bin information is changed either through 15-14-01
or through user programming, the destination for the transferred calls is also
changed.
Input Data
Default
Conditions
None
Feature Cross Reference
2 - 188
Program 15 : Extension, Basic Setup

15-14 : Programmable One-Touch Keys

Extension Number
Key Number
Item
Dial Data
No.
01 1~0, , # , Pause, Hook-
flash,
@ (Code for Answer-Wait)
Up to 24 digits
02 Name
No entries for any extension.
One-Touch Keys
UNIVERGE SV8100
Maximum eight digits
01~10
Name
Up to 24 Digits No Setting
Up to 12 Digits No Setting
Program 15 : Extension, Basic Setup
Default