NEC Univerge SV8100 Programming Manual page 211

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
UNIVERGE SV8100
Function
Function
Number
97 Door Box Access Key
98~99 --- Not Used ---
[2] Appearance Function Level (*00 ~*99) (Service Code 752)
Function
Function
Number
00 ICM Key
01 Trunk Key
02 Trunk Group
03 Virtual Extension Key
04 Park Key
06 Trunk Access Via
Networking
07 Station Park Hold None
08 CAP Key
10 ACD Log-In/Log-Out
12 ACD Emergency Call
Programming Manual
Function Number List (Continued)
[1] Normal Function Code (00 ~ 99) (Service Code 751)
Additional Data
Door Box Number (1~8)
Function Number List
Additional Data
None
Trunk Number (001~200)
Trunk Group Number
(001~100)
Extension Number or
Department Group Number
Park Number (01~64)
Network System Number
(01~50)
CAP Orbit No. (0001~9999)
If CAP Orbit No.0000 is used,
the next available orbit is
automatically selected.
LED Indication
On: Door Box Busy
Off: Door Box Idle
Fast flash: Door Box Incoming
LED Indication
Red On: Off Hook on Intercom Call
Red Blink: Intercom Call on Hold
Red On: Trunk Busy by Another User
Green On: Trunk Busy by Extension
Red On: Trunk Busy by Another User
Green On: Trunk Busy by Extension
Red On: Trunk busy by another user
Slow Blink (Red): Incoming Call
Slow Blink (Red): Call Placed in
Park by Another User
Fast Blink (Green): Extension
Placed Call in Park
Red On: Under log-on
Off: Under log-off
Red On: Under monitor, Override,
Standby
Fast Blink (Red): Supervisor
Telephone Receiving Emergency Call
Issue 1.0
2 - 177