NEC Univerge SV8100 Programming Manual page 442

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
Issue 1.0
2 - 408
Item
No.
07
Toll Charge Cost
Set this option to (1) have the SMDR report
include toll charges.
08
Incoming Call
Enable this option (1) to have the SMDR report
include incoming calls. If you disable this option
(0), incoming calls do not print.
09
Extension Number or Name
Set this option (1) to have the SMDR report
include extension numbers. Set this option (0)
to have the SMDR report include extension
names.
10 All Lines Busy (ALB) Output
Determine if the All Lines Busy (ALB) indication
should be displayed.
11
Walking Toll Restriction Table Number
12
DID Table Name Output
Determine if the DID table name should be
displayed.
13
CLI Output When DID to Trunk
Determine if the CLI output should be displayed
for DID.
14
Date
Determine whether the date should be
displayed on SMDR reports.
This option must be set to 0 if the trunk
name is set to be displayed in Program
35-02-03.
15
CLI/DID Number Switching
Determine whether or not the CLI/DID Number
Switching should be displayed.
16 Trunk Name or Received Dialed Number
Determine how the SMDR should print
incoming calls on ANI/DNIS or DID trunks. If set
to (1), ANI/DNIS trunks can print DNIS digits. If
set to (0) trunk names are printed instead.
17
Print Account Code or Caller Name of
Incoming Call
Determine if SMDR should print Account Code
or Caller Name of Incoming Call.
Item
Program 35 : SMDR Account Code Setup
UNIVERGE SV8100
Input Data Default
0 = Not Displayed
1 = Displayed
0 = Not Displayed
1 = Displayed
0 = Name
1 = Number
0 = Not Displayed
1 = Displayed
0 = Not Output
1 = Output
0 = Not Displayed
1 = Displayed
0 = Not Displayed
1 = Displayed
0 = Not Displayed
1 = Displayed
0 = CLI (CLIP)
1 = DID Calling
Number
0 = Trunk Port
Name
1 = Received
Dialed Number
0 = ACC
1 = CNAME
1
1
1
0
1
0
0
0
0
0
0