Account Code Setup - NEC Univerge SV8100 Programming Manual

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
Issue 1.0
Program 35 : SMDR Account Code Setup
Level:
IN
Description
Use
extension Class of Service. Assign a Class of Service to extensions in Program
20-06.
Input Data
Item
No.
01
02
03
04
2 - 412
Program 35-05 : Account Code Setup
Class of Service Number
Item
Account Code Mode
Use this option to select the Account
Code Mode (0~3).
Forced Account Code Toll Call
Setup
Use this option enable Account
Codes for all calls or just toll calls (for
mode 2 or 3 in Item 01 above).
Account Codes for Incoming Calls
Use this option to allow users to enter
Account Codes for incoming calls. If
disabled, any codes entered dial out
on the connected trunk.
Hiding Account Codes
Use this option to either hide or show
the Account codes on a telephone
display.

35-05 : Account Code Setup

to set various Account Code options for an
01~15
Input Data
0 = Account Codes Disabled (None)
1 = Account Codes optional
2 = Account Codes Required but not
verified (No verify)
3 = Account Codes Required and
Verified (Verify)
0 = Account Codes for toll and local
calls (All)
1 = Account Codes just for toll calls
(STD)
0 = Account Codes for incoming calls
disabled (No)
1 = Account Codes for incoming calls
enabled (Yes)
0 = Account Codes displayed
1 = Account Codes not displayed
Program 35 : SMDR Account Code Setup
UNIVERGE SV8100
Default
0
0
0
0