NEC Univerge SV8100 Programming Manual page 128

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
Issue 1.0
Input Data (Continued)
Item
No.
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
2 - 94
Item
Text Message Setting
Enable Handsfree Incoming Intercom Calls
Force Ringing of Incoming Intercom Calls
Programmable Function Key Programming
(2-Digit Service Codes)
BGM On/Off
Key Touch Tone On/Off
Change Incoming CO and ICM Ring Tones
Check Incoming Ring Tones
Extension Name Programming
Second Call for DID/DISA/DIL
Change Station Class of Service
Allows an extension user to change the COS of
another extension. Must be allowed in Program
20-13-28.
Automatic Transfer Setup for Each Extension
Group
Automatic Transfer Cancellation for Each
Extension Group
Destination of Automatic Transfer Each
Extension Group
Delayed Transfer for Every Extension Group
Delayed Transfer Cancellation for Each
Extension Group
DND Setup for Each Extension Group
DND Cancellation for Each Extension Group
--- Not Used ---
Dial Block
Temporary Toll Restriction Override
Pilot Group Withdrawing
Toll Restriction Override
UNIVERGE SV8100
Terminals Default
MLT No
Setting
MLT 721
MLT 723
MLT 751
MLT 725
MLT 724
MLT 720
MLT 711
MLT 700
MLT 679
MLT 677
MLT, SLT 602
MLT, SLT 603
MLT 604
MLT, SLT 605
MLT, SLT 606
MLT, SLT 607
MLT, SLT 608
MLT, SLT 600
MLT, SLT 775
MLT, SLT 650
MLT, SLT 663
Program 11 : System Numbering
Related
Program
20-09-05
20-02-12
20-09-05
20-02-12
15-07
11-11-38
15-02
15-01
20-13-28
20-11-17
24-05
20-11-17
24-05
20-11-17
24-05
24-02-08
20-11-17
21-07
21-14