Class Of Service Options (Incoming Call Service) - NEC Univerge SV8100 Programming Manual

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
Issue 1.0

20-09 : Class of Service Options (Incoming Call Service)

Level:
IN
Description
Use Program 20-09 : Class of Service Options (Incoming Call Service) to define
the incoming call feature availability for each extension Class of Service (COS).
Input Data
Item
No.
01
02
03
04
2 - 216
Program 20 : System Option Setup
Class of Service Number
Item
Second Call for DID/DISA/DIL/E&M Override
Turns off or on the extension ability to receive a
second call from a DID, DISA, DIL, or tie line
caller.
With this option set to 1, the destination
extension must be busy for a second DNIS
caller to ring through. If the destination
extension does not have a trunk or CAP
key available for the second call and a
previous call is ringing the extension but
has not yet been answered, the second
caller hears busy regardless of this
program setting.
Caller ID Display
Turns off or on the Caller ID display at an
extension.
Sub Address Identification
Defines whether or not an extension displays
the Caller Sub-Address.
Notification for Incoming Call List Existence
Determines whether or not an extension display
shows Check List when an incoming call is
missed by a user.
UNIVERGE SV8100
01~15
Default
Input
Data COS COS
01~14 15
0 = Off
1 = On
1 1
0 = Off
1 = On 0 0
0 = Off
0 0
1 = On
0 = Off
1 = On
0 0
Program 20 : System Option Setup
Related
Program
15-02-08
20-09-02