NEC Univerge SV8100 Programming Manual page 539

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
UNIVERGE SV8100
Input Data
Item
No.
08
09
10
11
12
13
Programming Manual
Item
Forced Unscreened Transfer
(Forced UTRF)
Use this option to enable or disable Automated
Attendant Forced Unscreened Transfer for the
Subscriber Mailbox. If enabled, each Screened
Transfer (TRF) to the extension is converted to an
Unscreened Transfer (UTRF). If disabled,
Screened Transfers from the Automated Attendant
occur normally.
Auto Time Stamp
Use this option to enable or disable Auto Time
Stamp for the Subscriber Mailbox. If enabled, after
the subscriber listens to a message VM8000 InMail
announces the time and date the message was left.
Auto Time Stamp also announces the message
sender (if known).
A subscriber can also enable Auto Time Stamp
from their mailbox.
System Administrator
(System Admin)
Use this option to designate the Subscriber Mailbox
as a System Administrator. This allows the
subscriber to use the options after logging onto
their mailbox.
Dialing Option
Dialing Option provides additional dialing options
for Next Call Routing Mailbox calls (see Next Call
Routing Mailbox below). If enabled, a caller who
accesses the Subscriber Mailbox to leave a
message can dial any option in the Next Call
Routing Mailbox Dial Action Table. If disabled, the
caller can dial only 0 (to use the Next Call Routing
Mailbox 0 action).
Next Call Routing Mailbox
(Next CR Mbox)
Use this option to assign a Next Call Routing
Mailbox to the Subscriber Mailbox. This provides
callers with additional dialing options while listening
to a Subscriber Mailbox recorded or default
greeting. The digits the caller can dial depends on
the setting of the Next Call Routing Mailbox and
Alternate Next Call Routing Mailbox options.
Directory List Number
Specify the Directory List number to which the
Group Mailbox belongs.
Input Data
0 = No (Disabled)
1 = Yes (Enabled)
0 = No (Disabled)
1 = Yes (Enabled)
0 = No (Disabled)
1 = Yes (Enabled)
0 = No (Disabled)
1 = Yes (Enabled)
Call Routing Mailbox 1
Number (0~32) (Call Routing
Mailbox 01)
No entry (entered by
pressing CLEAR) By default, Call
Routing Mailbox
numbers are
01=16.
0 = None
1~8 = List Number
= All
Issue 1.0
Default
0
0
0
0
0
2 - 505