Trunk Access Map Setup - NEC Univerge SV8100 Programming Manual

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
UNIVERGE SV8100
Level:
IN
Description
Use Program 14-07 : Trunk Access Map Setup to set up the Trunk Access Maps.
This sets an extension access options for trunks. For example, an extension can only
place outgoing calls on trunks to which it has outgoing access. There are 200 Access
Maps with all 200 trunk ports programmed in Map 1 with full access.
An extension can use one of the maps you set up in this program. Use Program 15-06
to assign Trunk Access Maps to extensions. Each trunk can have one of eight access
options for each Access Map.
Input Data
Item
No.
01
Default
Programming Manual
Program 14 : Trunk, Basic Setup
911 calls will override Program 14-07 settings.
Access Map Number
Trunk Port
Number
001~200 0 = No access
1 = Outgoing access only
2 = Incoming access only
3 = Access only when trunk on Hold
4 = Outgoing access and access when trunk on Hold
5 = Incoming access and access when trunk on Hold
6 = Incoming and Outgoing access
7 = Incoming access, outgoing access and access when trunk
Access Maps 1~200 = Trunk Ports 1~200 assigned with option 7 access
(incoming and outgoing access and access when trunk is on Hold).

14-07 : Trunk Access Map Setup

Input Data
on Hold
Issue 1.0
001~200
2 - 145