Firmware Update Time Setting - NEC Univerge SV8100 Programming Manual

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
UNIVERGE SV8100
Level:
IN
Description
(This program is available only via telephone programming and not through PC
Programming).
Use Program 90-36 : Firmware Update Time Setting to define the data for the
firmware update feature. This data is available to set for the WebPro/PC
Programming FW update feature. A compact flash card must be inserted in the
CD-CP00-US for this feature.
The following firmware is available to update with this feature:
Item
No.
01
02
Programming Manual
Program 90 : Maintenance Program

90-36 : Firmware Update Time Setting

main.bin
Dspdbu.bin
dsp.bin
Item
Year: 0~99
Month: 0~12
Firmware Update
Day: 00~31
Schedule Time
Hour: 00~23
Minute: 00~59
Update mode 0 = Non Active
1 = Activated
Input Data Default
0
0
0
0
0
0
Issue 1.0
Description
This Program sets the time to
update the firmware using a
compact flash card.
Time registration fails if an
expired time is registered.
This Program activates the
Firmware Update feature. If
this setting is 1, new firmware
on the compact flash card
updates according to the setting
at 90-36-01.
2 - 733