NEC Univerge SV8100 Programming Manual page 53

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
UNIVERGE SV8100
Program 10 : System Configuration Setup
Level:
IN
Description
Use Program 10-06 : ISDN - BRI Setup to configure the ISDN - BRI Terminal
Endpoint Identifier (TEI), mode of operation, and Service Profile Identifier (SPID)
number for each circuit B-Channels.
Input Data
Item
No.
01
02
03
04
Conditions
None
Feature Cross Reference
Programming Manual
SLOT Number
ISDN - BRI Circuit
Item
TEI Selection
Selects the method the system
uses when assigning Terminal
Endpoint Identifier (TEI) values
to BRI ports.
DID Mode
SPID 1
SPID 2
ISDN Compatibility
10-06 : ISDN-BRI Setup
Input Data
0 = Select by SPID number
1 = Select by Channel ID number
0 = Route by Called Party Number
1 = Route by Redirecting Number
Dial up to 20 digits
Dial up to 20 digits
Issue 1.0
1 ~ 24
1 ~ 4
Default
0
0
No Setting
No Setting
2 - 19