Fill Command - NEC Univerge SV8100 Programming Manual

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
UNIVERGE SV8100
Level:
IN
Description
Use Program 92-06 : Fill Command to allocate the data of each extension number
of each extension group or each table.
Input Data
Item
No.
01
02
03
The following table lists Programs that use the Fill Command function.
11-02
11-04
11-06
11-07
11-08
11-17
Programming Manual
Program 92 : Copy Program
Program Number
Item
Source Number
Destination Number (From)
Destination Number (To)
Program Number
Extension Numbering
Virtual Extension Numbering
ACI Extension Numbering
Extension (Department) Group Pilot Number
ACI Group Pilot Number
ACD Group Pilot Number

92-06 : Fill Command

XX-XX
Input Data
Each extension port = 1~512 (PGM 11-02)
Each virtual extension port = 1~256 (PGM 11-04)
Each ACI port number = 1~96 (PGM 11-06)
Each extension group = 1~64 (PGM 11-07)
Each ACI group = 1~64 (PGM 11-08)
Each ACD group = 1~64 (PGM 11-17)
Program Name
Issue 1.0
2 - 767