Program 24 : Hold/Transfer Setup; System Options For Hold - NEC Univerge SV8100 Programming Manual

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
Level:
IN
Description
Use Program 24-01 : System Options for Hold to define the system options
for the Hold feature.
Input Data
Item
No.
01
02
03
04
05
Programming Manual

Program 24 : Hold/Transfer Setup

Item
Hold Recall Time
A call on Hold recalls the extension that
placed it on Hold after this time. This time
works with the Hold Recall Callback Time
(Item 2).
Hold Recall Callback Time
A trunk recalling from Hold or Park rings
an extension for this time. This time works
with Hold Recall Time or Park Hold Time.
After this time, the system invokes the
Hold recall time again. Cycling between
time 01 and 02 and 06 and 07 continues
until a user answers the call.
Exclusive Hold Recall Time
A call left on Exclusive Hold recalls the
extension that placed it on Hold after this
time.
Exclusive Hold Recall Callback Time
An Exclusive Hold Recall rings an
extension for this time. If not picked up,
the call goes back on System Hold.
Forced Release of Held Call
Depending on the setting of Program
14-01-16, the system disconnects calls on
Hold longer than this time.

24-01 : System Options for Hold

Input Data
0~64800 (sec)
0~64800 (sec)
0~64800 (sec)
0~64800 (sec)
0~64800 (sec)
Program
Related
24
Default
Program
90
30
90
30
1800 14-01-16
2 - 321