Trunk Work Schedules - NEC Univerge SV8100 Programming Manual

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
UNIVERGE SV8100
Level:
SA
Description
Use
For each Work Schedule (1~4), designate the start and stop times for each of the
eight Work Periods. After you set up the schedules, assign them to days of the week
in Program 41-07. (This is the same program used by the ACD Agent Work
Schedules.)
Input Data
ACD Work Schedule Time Pattern Number
Conditions
None
Feature Cross Reference
Programming Manual
Program 41-06 : Trunk Work Schedules
Item Work Period
No. Mode Number
01 1~8
Automatic Call Distribution (ACD)
Program 41 : ACD Setup

41-06 : Trunk Work Schedules

to set up the Work Schedules for trunks.
Start Time End Time
0000~2359 0000~2359
Issue 1.0
1~4
Default
(Start) 0000
(End) 0000
2 - 433