Dial Extension Analyze Table - NEC Univerge SV8100 Programming Manual

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
Issue 1.0
Level:
IN
Description
Use
three or more digits. This program is only relevant if digits in 11-01-01 are set to 9
(Dial Extension Analyze).
Input Data
Item No.
Default
Conditions
Feature Cross Reference
None
2 - 110
Program 11 : System Numbering

11-20 : Dial Extension Analyze Table

Program 11-20 : Dial Extension Analyze Table
Dial Extension Analyze Table
01
02 Type of Dials:
0 = Not used
1 = Service Code
2 = Extension Number
5 = Operator Access
6 = F-Route Access
Dial Extension Analyze Tables are not set at default.
When the system uses the Dial Extension Analyze Table to determine the dial
type, the lower table has priority. For example, if Table 1 has 211 defined and
Table 2 has 2113 defined, Table 1 is used to determine the dial type.
to define the dial type based on
Dial Extension Analyze Table
Dial (Up to eight digits: 0, 1~9,
Program 11 : System Numbering
UNIVERGE SV8100
01~128
# , , @)