Vrs Delayed Message For Irg - NEC Univerge SV8100 Programming Manual

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
UNIVERGE SV8100
Level:
IN
Description
Use Program 22-14 : VRS Delayed Message for IRG (Incoming Group Ring) to
define for each incoming ring group the timers, VRS message number and type of
tone for VRS Waiting Message.
Input Data
Programming Manual
Program 22 : Incoming Call Setup

22-14 : VRS Delayed Message for IRG

Incoming Ring Group Number
Item
Item
No.
st
01
1 Delayed Message Start Time
Time before the VRS Delay Message is
played for IRG.
st
02
1 Delayed Message Number
VRS message that is used for the 1st
Delayed Message.
st
03
1 Delayed Message Sending Count
This is the number of times the 1st Delay
Message is played. If set to 0, the 1st
Delay Message is not played.
nd
04
2 Delayed Message Number
VRS message that is used for the 2nd
Delayed Message.
nd
05
2 Delayed Message Sending Count
This is the number of times the 2nd Delay
Message is played. If set to 0, the 2nd
Delay Message is not played.
06
Tone Kind at Message Interval
What is heard between the Delay
Message.
07
Disconnect Time After the End of VRS
Delayed Message
Time, after all 2nd Delay Messages are
played, before the caller is disconnected.
1~100
Input Data Default
0~64800 (sec)
0~101
0 = No Message
101 = Fixed
Message
0~255 (time)
0~101
0 = No Message
101 = Fixed
Message
0~255 (time)
0 = Ring Back Tone
1 = MOH Tone
2 = BGM Source
0 = No Disconnect 60
1~64800 Seconds
Issue 1.0
0
0
0
0
0
0
2 - 309