NEC Univerge SV8100 Programming Manual page 166

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
Issue 1.0
2 - 132
Item
Item
No.
04
Transmit Gain Level
for Conference and
Transfer Calls
Use this option to
select the CODEC
gain type used by the
trunk when it is part of
an Unsupervised
Conference.
05
Receive Gain Level
for Conference and
Transfer Calls
Use this option to
select the CODEC
gain type used by the
trunk when it is part of
an Unsupervised
Conference.
06
SMDR Printout
Use this option to
have the system
include/exclude the
trunk you are
programming from the
SMDR printout. Refer
to Program 35-01 and
35-02 for SMDR
printout options.
07
Outgoing Calls
Use this option to
allow/prevent
outgoing calls on the
trunk you are
programming.
08 Toll Restriction
Use this option to
enable/disabled Toll
Restriction for the
trunk. If enabled, the
trunk follows Toll
Restriction
programming
(example: Programs
21-05, 21-06). If
disabled, the trunk is
a toll free line.
Input Data Default
1~63 32 (0dB)
(-15.5dB ~
+15.5dB in 0.5dB
intervals)
1~63 16 (-8dB)
(-15.5dB ~
+15.5dB in 0.5dB
intervals)
0 = No Print
Out
1 = Prints Out
0 = Deny (No)
1 = Allow
(Yes)
0 = Restriction
Disabled
(No)
1 = Restriction
Enabled
(Yes)
Program 14 : Trunk, Basic Setup
UNIVERGE SV8100
Related
Program
0 35-01
35-02
1
1 21-04
21-05
21-06