Dial Block Setup - NEC Univerge SV8100 Programming Manual

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
Issue 1.0
Level:
IN
Description
Use Program 21-09 : Dial Block Setup to define the Dial Blocking Toll Restriction
Class and Dial Block Password to be used by the Supervisor extension.
Input Data
Item
No.
01
02
Conditions
Feature Cross Reference
None
2 - 274
Program 21 : Outgoing Call Setup
Toll Restriction Class With Dial Block
Assign a Toll Restriction Class of Service when the Dial Block
feature is used.
Supervisor Password
Assign a 4-digit password to be used by the supervisor to enable
or disable Dial Block for other extensions.
This function works by password and Class of Service control (the supervisor is
not an assigned extension). If Dial Block is available for all Classes of Service,
everyone may become a supervisor if they know the Dial Block password.

21-09 : Dial Block Setup

Item
Program 21 : Outgoing Call Setup
UNIVERGE SV8100
Input Data Default
1~15 15
0~9, , # No
Setting
(4-digit fixed)