Isdn Bri & Pri Layer 3 (T-Point) Timer Setup - NEC Univerge SV8100 Programming Manual

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
UNIVERGE SV8100
Program 81 : Basic Hardware Setup for Trunk
81-06 : ISDN BRI & PRI Layer 3 (T-Point) Timer Setup
Level:
IN
Description
Use Program 81-06 : ISDN BRI & PRI Layer 3 (T-Point) Timer Setup to define the
various basic timers for layer 3 of ISDN BRI/PRI (defined in Program 10-03-04).
Input Data
Item
No.
01
02
03
04
05
06
07
Programming Manual
Layer 3 Timer Type Number
Item Description
T301 Specifies the timer value in 1/100ths
of a second of the timer to be started
when the ALERT message is
received.
Specifies the timer value in 1/100ths
T302
of a second of the timer to be started
when the SETUP ACK is sent. Timer
is also restarted when INFO is
received.
Specifies the timer value in 1/100ths
T303
of a second of the timer to be started
when SETUP is sent.
Specifies the timer value in 1/100ths
T304
of a second of the timer to be started
when the SETUP ACK is received.
Timer is also restarted when INFO is
received.
Specifies the timer value in 1/100ths
T305
of a second of the timer to be started
when DISC without progress No. 8 is
sent.
T306 Specifies the timer value in 1/100ths
of a second of the timer to be started
when DISC with progress indicator
No. 8 is sent. This timer is valid for
Network side use only.
Specifies the timer value in 1/100ths
T307
of a second of the timer to be started
when SUSPEND ACK is sent. This
timer is valid for Network side use
only.
1~5
Input Data
0,180~254 (sec) 180 (sec)
1~254 (sec)
1~254 (sec)
0~254 (sec).
1~254 (sec)
0~254 (sec)
1~254 (sec) 180 (sec)
Issue 1.0
Default
15 (sec)
4 (sec)
30 (sec)
30 (sec)
30 (sec)
2 - 613