Gain Table For Ars/F-Route Access - NEC Univerge SV8100 Programming Manual

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
Issue 1.0
Level:
IN
Description
Use
an extension dials ARS/F-Route number:
If the incoming call is transferred to another line using ARS/F-Route:
Input Data
2 - 474
Program 44 : ARS/F-Route Setup

44-07 : Gain Table for ARS/F-Route Access

Program 44-07 : Gain Table for ARS/F-Route Access
The Extension Dial Gain Table, assigned in Program 44-05, is activated.
The Extension Dial Gain Table follows Outgoing transmit and Outgoing receive
settings.
The Tandem Gain Table, assigned in Program 44-05, is activated.
The Tandem Gain Table follows the Incoming transmit and Incoming receive
settings for incoming line, and Outgoing transmit and Outgoing receive settings for
the outgoing line.
For ARS/F-Route calls, the CODEC gains defined in Program 14-01-02 and
14-01-03 are not activated.
Gain Table Number
Item
No.
01
Incoming Transmit
02
Incoming Receive
03
Outgoing Transmit
04
Outgoing Receive
Item Input Data
1~63
(-15.5 ~ +15.5dB)
1~63
(-15.5 ~ +15.5dB)
1~63
(-15.5 ~ +15.5dB)
1~63
(-15.5 ~ +15.5dB)
UNIVERGE SV8100
to set the gain/PAD table. If
1~500
Default
32
(0dB)
32
(0dB)
32
(0dB)
32
(0dB)
Program 44 : ARS/F-Route Setup