Table of Contents
Advertisement
Hot-swap Hard Disk Drives
8.2.2
Installing/Removing Dummy Module
Free slots are provided with a dummy module that must be removed before
installing an additional HDD module.
Figure 30: Removing dummy module
Ê Press the both tabs on the dummy module together (see figure 30 on
page 82) until the locking mechanism disengages and remove the dummy
module from the mounting location.
The dummy module is installed in the reverse order.
V
CAUTION!
Keep the dummy module for future use. If the HDD module is removed
again and not replaced with a new module, the dummy module must be
reinstalled due to cooling, to comply with applicable EMC regulations
(regulations on electromagnetic compatibility) and to protect against fire.
82
Hot-plug/hot-swap Components
A26361-K881-Z102-4-7619
Advertisement
Table of Contents
