Removing A Psu; Installing A Psu Dummy Module - Fujitsu PRIMERGY RX2560 M2 Upgrade And Maintenance Manual

6.3.2

Removing a PSU

Figure 66: Removing a PSU
Ê Fold up the handle on the PSU.
Ê Press in on the green locking latch (1).
Ê While keeping the green locking latch pressed, pull the PSU out of its slot
(2).
6.3.3

Installing a PSU dummy module

Figure 67: Installing a PSU dummy module
Ê Insert the dummy cover into the empty bay with the impressed arrow symbol
facing to the top (see circle).
Ê Push the dummy cover into its bay until it locks in place.
V
CAUTION!
Always install dummy modules into unused PSU slots to comply with
applicable EMC regulations and satisfy cooling requirements.
TX2560 M2 / RX2560 M2 Upgrade and Maintenance Manual
Power supply unit (PSU)
149