Modifying Trunk Parameters - Avaya G350 Installing And Upgrading

Modifying trunk parameters

1. To modify the trunk's parameters, click the configuration icon in the Actions column of the
IP Trunk List screen.
Figure 99: The configuration icon in the Actions column
The IP Trunk Configuration screen appears, with the trunk's current parameters displayed.
Figure 100: The IP Trunk Configuration screen (with current parameters)
2. Modify the trunk parameters and click Continue. The IP Trunk List appears. Select an
additional action from the Actions column, or click Continue to proceed to the CO Trunk
List screen. See The CO Trunk List screen on page 191.
Issue 4 February 2007
Firmware configuration
187