Removing An Fbu From A 2.5-Inch Hdd Chassis; Preliminary Steps; Removing The Fbu With The Holder - Fujitsu PRIMERGY RX2530 M4 Upgrade And Maintenance Manual

9.6.3

Removing an FBU from a 2.5-inch HDD chassis

Upgrade and Repair Unit
(URU)
Tools: tool-less
V
CAUTION!
Dispose of used battery properly. Keep away from children.
●
Do not throw flash backup units into the trash can. Batteries must be
●
disposed of in accordance with local regulations concerning special
waste.
9.6.3.1

Preliminary steps

"Shutting down the server" on page 49
Ê
"Disconnecting the power cord" on page 50
Ê
"Getting access to the component" on page 52
Ê
9.6.3.2

Removing the FBU with the holder

Figure 183: Removing the FBU with the holder
Ê Lift up the green locking handle on the holder (see circle) while sliding the
holder in direction of the arrow as far as it will go.
I
After that, the shoulder screw caps on the chassis floor will rest in the
wide ends of the keyhole slots on the holder.
RX2530 M4
Upgrade and Maintenance Manual
Expansion cards and backup units
Hardware: 15 minutes
263